DUROPUR 1-Comp. PUR Adhesion Promoter FH-1000

As a primer for mineral substrates in order to apply a subsequent coat of paint. As an adhesion promoter for renovation on old, but still intact 2-component floor coatings (carry out adhesion test beforehand). As a colored primer and top coat tinted with 20 % BRILA-TINT AC 2-component color paste. As an extremely hard-wearing varnish for composite panels made of wood and other materials. Also suitable to a limited extent as an interior sealing varnish for gasoline tanks (without guarantee). DUROPUR is a moisture-curing 1-component adhesion promoter based on polyurethane resin. The ingress of atmospheric moisture during application creates compounds with which the polyurethane resin can crosslink. It meets the highest requirements in terms of chemical and mechanical resistance. DUROPUR gives hard, abrasion-resistant yet elastic coatings with excellent resistance to solvents, petrol, mineral oils, cleaning agents, diluted acids and alkalis, etc.

Delivery form
Packages of 10, 5 and 1 liter.

Gloss level
Approximately 80% at 60° (depending on the absorbency of the substrate).

Shades
Transparent - yellowish. With addition of 20 % BRILA-TINT AC color concentrate according to RAL or NCS color chart. Due to storage stability, the pigment paste is supplied separately and mixed in by the applicator just before application. 5 liters of DUROPUR 1K-PUR Adhesion Promoter FH-1000 and 1 kg of BRILA-TINT AC 2K color paste. With DUROSAFE Color Concentrate FH.

Further information

• 324_Technical_Sheet_EN
• 324_Safety_Data_Sheet_EN
• Boden_Beurteilung
• 3.0_Gute_Gründe_für_höchste_Anforderungen
• Untergrund_Erkennung
• Fachdokumentation_Bodenbeläge
• Taupunkt_Tabelle
• Pinsel_Sortiment
• Roller_Sortiment